Belt conveyor UV curing systems

Floor standing and benchtop conveyor systems for production or laboratory

Belt conveyor UV system

Noblelight offers floor standing or benchtop conveyor systems, the DRS10/12 and LC6B / LC6U respectively, as standard products for use with our microwave-powered or Semray® UV LED curing systems.

These UV curing conveyors are suitable for production, laboratory and R&D applications. Both formulating chemists and manufacturing production managers use these conveyors to test UV-curable adhesives, inks and coatings while developing new formulations, testing cure response, assessing performance and for low-volume or short production runs.

LC6B & LC6U Benchtop Conveyor

This compact benchtop conveyor is ideal for laboratory and R&D testing, yet rugged enough for pilot plant and production environments.

Now available with simple plug and play mounting kit for use with UV LED curing systems!

Benefits

  • Compact design minimizes bench space needed
  • Rugged enough for small part production
  • Easy to use – on/off, speed indicator, lamp on/off
  • Flexibility to switch between LED and microwave-powered UV curing systems
  • Adapt to your specific needs – easily adjust lamp height and orientation, belt speed

Specifications

  • Lamp Types:
  • Weight: 25 kg (55 lbs.)
  • Overall length: 1,070 mm (42 in.)
  • Overall width: 510 mm (20 in.)
  • Overall height: 310 mm (12.2 in.)
  • Nominal curing width: 152 mm (6 in.)
  • Belt speeds: 0.6 to 76 m/min. (2 to 250 fpm)
  • Controls: Power on/off, speed adjust, lamp on/off.**
  • Power: 115/230 VAC, single phase, 50/60 Hz, internally selected.

**For F300S, LH6 Mark II, and Semray® UV4103-2S only

Available Accessories

  • LED mounting kit for Semray® UV4103-2S System
  • Snap-in light shields
  • Out feed knife
  • Quartz air deflector
  • Feed chute
  • External end reflectors
  • Exhaust blower, duct transition, duct fittings

DRS 10/12 Floor Standing Conveyor

This floor standing conveyor is ideal for both laboratory and production use and can accommodate a variety of parts up to 4 inches high. Designed specifically for use with Noblelight’s microwave-powered UV curing systems – mounting kit for UV LED curing systems is coming soon!

Benefits

DRS 10/12 Floor Standing Conveyor
  • Easy to use – digital speed indicator, safety interlocks
  • Flexibility to switch between different microwave-powered UV curing systems
  • Adapt to your specific needs – easily adjust lamp height, orientation, rows (up to two), cure width and belt speed
  • Durable steel construction, built-in exhaust blower

Specifications

Lamp Configurations: (lamps purchased separately)

  • F600S, LH10 Mark III, LH10 Mark II: One lamp wide, one or two rows.
  • F300S: Two lamps wide, one row.
  • LH6 Mark II: Two lamps wide, one or two rows.
  • LED Options: Available as a custom solution now, mounting kit accessory available soon. Please inquire

Conveyor Belt Width: 355 mm (14 in.)
Overall Length: 1,676 mm (66 in.)
Overall Width: 813 mm (32 in.)
Conveyor Belt Height: 819.2 mm +50.8 mm (32.2 in. +2.0 in.)
Nominal curing width: 254 mm (10 in.) or 305 mm (12 in.), depending on lamp system
Belt Speed Range: Variable speed in five (5) ranges: 0.3–4.6 mpm, 1.5–22.9 mpm, 3–45.7 mpm, 4.6–68.6 mpm, 10.7–152.4 mpm (1–15 fpm, 5–75 fpm, 10–150 fpm, 15–225 fpm, 35–500 fpm).
Speed Control: Variable with digital display
Voltage: 115 V, 50/60 Hz, 1 phase, 30 A (230 V, 50/60 Hz, 1 phase, 15 A, optional).

Custom UV Curing Conveying Solutions

Need something to fit your exact needs? Check out our custom designed UV curing solutions including custom conveyors.  Learn more about custom UV curing solutions

Downloads